Paddywax Bistro Wild Mushroom Tin Candle: Care and Safety Tips

Quick answer

Trim both wicks to about 1/8 inch before every burn, keep sessions to roughly 1–2 hours, and never leave the tin unattended. This keeps the flame steady and the tin from overheating.

Step-by-step care and safety routine

1. Trim both wicks before every burn: Use a wick trimmer or small scissors to cut each wick to about 1/8 inch (3 mm). Do this while the candle is cool and the wax is hard. Common mistake: trimming only one wick because the other is harder to reach. Trimmed wicks reduce soot and keep the flame from getting too large.
2. Place the tin on a heat-safe surface: Set the candle on a trivet or heat-resistant mat, away from drafts, curtains, and anything that can catch fire. Keep it out of reach of children and pets. Common mistake: putting the tin directly on a polished wood table, which can mark the finish. A stable, non-flammable base prevents tipping and heat damage.
3. Burn in short sessions: Light both wicks and let the candle burn for 1–2 hours at a time. This is long enough to melt the surface evenly without letting the tin overheat. Common mistake: burning for hours on end, which can make the metal uncomfortably hot. Short sessions help the wax pool form evenly and protect the tin.
4. Check the melt pool and extinguish if needed: After about an hour, look at the wax surface. If melted wax is within half an inch of the rim, blow out the candle and let it cool. Common mistake: waiting until the wax spills over the edge. Stopping early prevents overflow and keeps the wicks centered.
5. Extinguish without splashing wax: Use a candle snuffer or gently blow out the flame. Do not use water. Common mistake: blowing hard enough to splatter hot wax onto the printed tin or nearby surfaces. A gentle snuff keeps the wax clean and the artwork intact.
6. Let the tin cool completely before moving it: Wait until the tin is cool to the touch before relocating or storing it. Never move a lit candle. Common mistake: picking up the tin while the wax is still liquid, which can spill hot wax. Cooling first prevents burns and wax spills.

Product facts

• Paddywax: Bistro 4.5oz Mushroom Printed Tin Candle - Wild Mushroom: 4.5 oz two-wick tin candle with a faux pull-tab and hand-illustrated artwork. Two wicks need trimming before each use, and the small tin size means shorter burn sessions keep the metal from getting too hot.